Understanding LTE X2 interface

The Problem

An operator requested 3DB CONSULT to explain the concept of LTE X2 interface as they were facing problems configuring the X2 interface. They had done everything according to the instructions provided:

a) add a source IP route for all eNodeB’s and

b) activate the X2 SON delete function,

but the X2 interface was not correctly established.

Explanation / Troubleshooting

The LTE X2 control plane external interface (X2-CP) is defined between two-neighbor eNodeB’s. The transport network layer is built on SCTP on top of IP. The application layer signaling protocol is referred to as X2-AP (X2 Application Protocol).

X2-UP (User Plane)

The LTE X2-UP protocol tunnels end-user packets between the LTE eNodeB’s. The tunneling function supports the identification of packets with the tunnels and packet loss management. X2-UP uses GTP-U over UDP or IP as the transport layer protocol similar to LTE S1-UP protocol. LTE S1-UP and LTE X2-UP use the same U-plane protocol to minimize protocol processing for the eNodeB at the time of data forwarding. The LTE X2 user plane external interface (X2-U) is defined between LTE eNodeB’s. The LTE X2-U interface provides non-guaranteed delivery of user plane PDUs. The transport network layer is built on IP transport of LTE and GTP-U is used on top of the UDP or IP to carry the user plane PDUs. The X2-UP interface protocol stack is identical to the S1-UP protocol stack.

LTE X2-CP (Control Plane)

LTE X2-CP has SCTP as the transport layer protocol which is similar to the LTE S1-CP protocol. The load management function allows exchange of overload and traffic load information between LTE eNodeB’s to handle traffic load effectively. The handover function enables one eNodeB to handover the UE to another eNodeB. A handover operation requires transfer of information necessary to maintain the LTE RAN services at the new eNodeB. It also requires the establishment and release of the tunnels between source and target eNodeB to allow data forwarding and informs the already prepared target eNodeB for handover cancellations.

LTE X2-CP protocol functions include:

  • intra LTE-Access-System mobility support for the UE
  • context transfer from source eNodeB to target eNodeB
  • control of user plane tunnels between source eNodeB and target eNodeB
  • handover cancellation
  • uplink load Management
  • general X2 management
  • error handling

For more information on LTE or any Radio Network related question don’t hesitate to contact
3DB CONSULT at: toomas.sarv@3dbconsult.com

Additional info

You might be interested in some other interesting topics concerning cellular networks engineering, such as:

Leave a Reply

Your email address will not be published. Required fields are marked *

Información básica sobre protección de datos Ver más

  • Responsable: 3DB CONSULTORES, S.L..
  • Finalidad:  Moderar los comentarios.
  • Legitimación:  Por consentimiento del interesado.
  • Destinatarios y encargados de tratamiento:  No se ceden o comunican datos a terceros para prestar este servicio.
  • Derechos: Acceder, rectificar y suprimir los datos.
  • Información Adicional: Puede consultar la información detallada en la Política de Privacidad.